Mon, 25/10/2010 - 12:00 |  Umair

Providing the developer with a detail that meets local planning requirements regarding Fiberglass from floor to roof level.  We are catering to the need of Automotive, Military, Chemical Processing, Oil & Gas, Construction, Petrochemical, Electrical / Utility, Pulp & Paper, Food & Beverage, Transportation,
Infrastructure etc.

TYPICAL APPLICATIONS INCLUDES:
Potable Water Suppler
Sewage
Acoustics, Modular and Kiosks
Chemical Storage & Transportation
Wastewater Treatment Applications
Fiberglass Piping Systems

1.General
Thermoset piping systems are composed of plastic materials and are identified by being permanently set cured or hardened into shape during the manufacturing process. Thermoset piping system are combination of resins and reinforcing materials. These piping systems are generally not manufactured to dimensional or pressure standards. Therefore, considerable variation between manufacturers exist in regard to available size, maximum pressure rating and maximum temperature rating. Performance requirements, including manufacturing, conforms to ASTM Standards in order to not sole-source the piping system.

 The Three primary thermoset resins are as follows (Other resins are also available.):

Reinforced Polyesters
Reinforced polyester thermoset piping systems are the most widely used due to affordability and versatility. The maximum continuous operating temperature for optimum chemical resistance is 71C (160F).

Reinforced Vinyl Esters
The vinyl ester generally used for chemical process piping systems is bisphenol-A fumarate due to good corrosion resistance.

Reinforced Epoxies
Although epoxies cure without the need for additional heat, almost all pipes are manufactured with heat-cure.